Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: WILLYAM1 on February 22, 2011,07:51:00

Title: akai-lct32ae
Post by: WILLYAM1 on February 22, 2011,07:51:00
Hi to all.
tv works fine and after a 10-15 min  a lot of white dots all over the screen and sound go off.
any adia??.
no bullging capi.
willyam1
Title: Re: akai-lct32ae
Post by: epi on February 22, 2011,08:06:35
Are the dots syncronized, i.e: in slanted vertical bars or random? What type of main board and power supply?

Frank
Title: Re: akai-lct32ae
Post by: WILLYAM1 on February 22, 2011,08:34:26
thanks epi.
here some photos.
im not sure about the dots sync or random.
 the p.s is jsk.....
Title: Re: akai-lct32ae
Post by: epi on February 22, 2011,08:46:50
Hi Willyam,
If the dots run from side to side in near vertical bars, or do they appear anywhere on the screen. If first condition maybe interference from the power supply or inverter, otherwise maybe T-Con or main board. Can you pic the fault too.

Looks like Vestel ¿? make notes of the boards, also if you are using mobile  for pics use a magnifying lense can get good results, your pics are a bit out of focus.

Frank
Title: Re: akai-lct32ae
Post by: WILLYAM1 on February 22, 2011,09:00:39
thanks again epi.
i will get a better photos and check about the dots   letter.
willyam1
Title: Re: akai-lct32ae
Post by: Turnip on February 22, 2011,13:35:41
H Frank,

Guess Willyam 1 needs a mobile phone like yours - doesn't look Vestel to me - Chris.
Title: Re: akai-lct32ae
Post by: epi on February 22, 2011,15:28:55
Hi Chris, Willyam1
No, not vestel ¿?, put up some details of the boards, nothing like the good old tube days.
Think I'll put my mobile and magnifying glass up for sale.........

all the best
going fer a  :party0036:

Frank
Title: Re: akai-lct32ae
Post by: WILLYAM1 on February 24, 2011,07:10:21
Hi to all  thanks to epi and turnip.
problem solved.1 small capi 100/35v near to a 1.8v regulator this volltage was with a small rippel aprox 0.4v was changed and until now tv is ok .main boatd faulty.
thanks willyam1