Mulja tv repair portal
Equipment Repairs => LCD TV forum => Topic started by: Tmg on February 22, 2011,13:13:54
-
Hello
Wonder if anyone can shed any light on this problem Philips 32PFL5403D int 6 flashes standby led
sometimes when switching on from standby this set will shut down and the red led will keep flashing 6 times until reset at mains. Otherwise the picture is great
I have tested all the electrolytics in the power supply with a ESR meter and resoldered all the joints on the power board.
Has anyone had a problem the same 6 flashes
Thanks in advance
Tony.
:dubbio:
-
Hi TMG,
What P/S ? - Chris
-
Hi Turnip
what do you mean P/S where did i say that unless you refer to power supply
-
hi
he means the power supply panel
dave
-
Oh Hello Sparky and Turnip how are you guys
yes i did originally post about the power supply panel
I suppose the next thing is to monitor the power supply voltages
and get a manual
-
sorry guys
Model Number 32PFL5403D/10
Chassis Number Q522.1E LA
Power Supply Number DELTA DPS-182CP
-
About 6 flashes.
Could this be something ?
-
Thanks Kilroys
For this very usefull information
But i am afraid the power supply referred to in the symptom is not the same as used in my set
But thanks for taking the time out and having a look
-
Hi does anyone know where i can get a service manual for this set
Thanks
-
:sign0085:
Hi can anyone help to find out what the 6 flashes of the standby light would mean
or maybe someone could have a old power supply board that works at reasonable cost.
Its just that this set belongs to a work college and i dont want to let her down.
Regards
-
Hi TMG,
Your tv chasisis Philips 32PFL5403D/10 (Chassis Q522.2E LA), in a mo I will upload to "downloads/LCD Philips/Q549.2E LA" service manual, which ha s full info on LED pulses and fault codes, also I see there is there the Q528.1E LA service manual. which may be similar.
Frank
-
Hi again
Located your manual see dowloads/philips lcd/Philips 32PFL5403D/10 (Chassis Q522.2E LA)
Hope this helps
Frank
-
Hi
Thanks Frank That manual will be very helpfull,
if you also find any further info let me know thanks
-
Hi
still not getting anywhere with this
it seems sometimes it will run for hours then the set will switch itself off and the LED will flash 6 times
other times when you put this set into standby and back on it wont start with the 6 flashes
all voltages seem ok and stable 12v and 24v that is with no errors stored in the sets memory
:41:
-
Model Number 32PFL5403D/10
Chassis Number Q522.1E LA
Power Supply Number DELTA DPS-182CP
Can anyone help with a working power supply board