Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: andt1968 on February 22, 2011,16:31:39

Title: ALBA lcd32880H Df
Post by: andt1968 on February 22, 2011,16:31:39

Hi strange one this
Have power from leadgoing to the board but no power at all to TV no lights on front no nothing.
This must be the powerboard but where do i start could it be a fuse or bad cap?
Please help me

Title: Re: ALBA lcd32880H Df
Post by: epi on February 23, 2011,03:49:35

Is it a 17IPS10-3 power supply, have no schematic at the mo.
Check mains switch if fitted, mains fuse, and standby (always) 5V circuit, may be low faulty cap, or may not exist faulty smp IC.

Frank

Title: Re: ALBA lcd32880H Df
Post by: Turnip on February 23, 2011,13:04:41

Hi 1968,

Nothing listed here - send decent piccies of the works (from the back) -  Chris.

Title: Re: ALBA lcd32880H Df
Post by: Kilroys on February 24, 2011,02:38:07

If a service manual could be to any help

Title: Re: ALBA lcd32880H Df
Post by: Turnip on February 24, 2011,08:20:12

Hi folks,

Have similar probs with 17IPS15-4 - Power to chopper chip but V/low secondary voltages. Note on several forums that this is a common prob.

All the best - Chris.