Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: Turnip on March 09, 2011,09:21:27

Title: Bush IDLCD19W008HD tuning - pin code ?
Post by: Turnip on March 09, 2011,09:21:27

Hi folks,

Have one of these with the B.TD703D main board. It will find DVB channels but not memorise without a pin-code. Seems to be 6 figure code - haven't found it yet.

Any thoughts ? - Chris.

Title: Re: Bush IDLCD19W008HD tuning - pin code ?
Post by: sparky on March 09, 2011,10:03:52

hi
chris try and do a first time installation with no aerial connected
then but aerial  in and try that
dave

Title: Re: Bush IDLCD19W008HD tuning - pin code ?
Post by: Turnip on March 09, 2011,11:33:03

Hi Sparky, thanks fer that.

Did as you suggested and DVB channels were there and watcheable 'till set was switched off then on again where nothing was in left memory.

Seems to remind me of something similar a while ago - will go top of our stairs, see if I remember - doubt it though.

Thanks again - at least I got piccies - Chris.

PS - Discovered default pin code is 888888 - set now tuned OK - Next day Analogue OK DVB now't, another one for the heap  - Merde.