Mulja tv repair portal

Equipment Repairs => CRT TV forum => Topic started by: buzzle on September 13, 2007,23:41:48

Title: Sony KV-32HV600 standby LED blink 7 times
Post by: buzzle on September 13, 2007,23:41:48

I got a KV-32HV600/ chassis DA4 build in Oct 2002 TV set just went off to the standby LED with 7 blinking code with no video/audio.

I was able to reset it by unplugging the power cord for several hours a few time but now it refuses to cooperate.

Appreciate any suggestion/idea of the blinking code and what is wrong/failure with the TV and what do I need to find/replace the part.

And if anyone have a diagram or service manual for this
thx

Title:
Post by: Vladimir H on September 16, 2007,16:25:33

ist
[file=../../e107_files/public/1189887922_274_FT490_kv-32hs500_32hv600_34drc500_34xbr800_36hs500.pdf]1189887922_274_FT490_kv-32hs500_32hv600_34drc500_34xbr800_36hs500.pdf[/file]

Title:
Post by: Vladimir H on September 16, 2007,16:27:25

Full chema ist 26MG

Title:
Post by: buzzle on September 20, 2007,01:54:31

Hi Vlad,

Thank you for the schematic.   This is a great help and i'm able to identify the problematic area.   However, I still can't  ping point the faulty component but the general area of the D board.   How do I go from here and where do I find a replacement part ?

Thank you for your help.