Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: ianmorgan1965 on April 08, 2011,18:29:49

Title: Techwood 32832HD
Post by: ianmorgan1965 on April 08, 2011,18:29:49

Hi, have a strange fault with this unit,, it has a flickering double image, though every so often it corrects itself for a second or 2! The usual Lvds cables seem well seated? Any help is greatly appreciated.

Title: Re: Techwood 32832HD
Post by: sparky on April 09, 2011,04:33:17

hi
what chassis is it post a pic of psu,and mainboard
is it vestell?
dave

Title: Re: Techwood 32832HD
Post by: mulja on April 09, 2011,04:42:57

Could be dry joint on video processor
i had same on vestel chassis 17mb15-5
IC224
 :08:

Title: Re: Techwood 32832HD
Post by: TellyFun on April 09, 2011,16:02:22

I would say t-con is at fault,had one a few days ago with a split picture ,one side was left to right the other was right to left :57: very odd but new t-con fitted was all ok again,try re-setting the eeprom in service mode first.

Title: Re: Techwood 32832HD
Post by: Turnip on April 10, 2011,11:29:58

Hi Sparky,

Some folks try mend other folks sets without any panel info - could be table tapping at work (Tall dark Vestel perhaps - knock once for 15nfs - twice for that common pop where knowing folks wrap the blown mains fuse with silver foil and render the board blackly colourful)

Bit doubtful - still waiting for electricity too cheap to meter and return of that Jesus chap - taking odds on the second - first, even with some new Tories in power  - Chris