Mulja tv repair portal
Equipment Repairs => PLASMA TV forum => Topic started by: old tvman on May 19, 2011,10:25:08
-
Hello,
The problem with this one is a blank screen displaying V3.20.1 with no remote functions,can anyone help?
Cheers davy
-
Hello,
The problem with this one is a blank screen displaying V3.20.1 with no remote functions,can anyone help?
Cheers davy
Sounds like the main board has died! I had a brand new lg that had smashed screen, think it was PQ3000 but would need to check
Ronnie
-
your main board has not died, i work for lg and when i get a moment ill post the fix, you may need the service remote which i may loan you, will reply in 10 mins with fix
-
i think there is a firmware fix - nice and simple on this model using a usb stick
but i have not got this
hope tvtony can help
-
hello, on the service remote there are some codes additional to the standard lg codes, you press the instop button, and you must not unplug the set, then a full retune is done, and it cures issues, the remote is available from chs but for something that might be used once its a dear item, we have a few of these remotes and we can lend you one if you want. 07955 108302, take care
there are some detailed instruction which i will send you as a wrong keypress can upset the flash
tony
-
Many thanks for the helpfull replies,will contact tvtony this evening .
davy.
-
Many thanks to tv tony who very kindly loaned me a lg service remote and supplied a fix.
-
glad it worked, im not really a bad'n, anything else? take care
tony walker
-
Hi Tony,
I have just found this thread after having the same problem with a 42PG3000...
However I suspected a main board failure and sourced a replacement, this however was from a 50PG3000,
the board works but as the panel size is different its not 'quite' right. I can't find a way of changing the panel size thru (MENU + MENU) or (OK + OK).
Wondering if you may be able to help
Pete (Of Malcolms TV, Dewsbury 01924 450999)