Mulja tv repair portal

Equipment Repairs => Service Menu Codes => Topic started by: watteau on June 09, 2011,08:30:27

Title: HAIER Service mode
Post by: watteau on June 09, 2011,08:30:27

HAIER SERVICE MODE:  
[1] MENU, 8, 8, 9, 3
[2] or, Numeric keys “062596” + DISPLAY key. ('FAC' mode menu). Then select “Factory” item.
[3] or, DISPLAY/INFO, P.MODE, S.MODE, SLEEP (Use 'E2P INT', to initialise the EEPROM)

HOTEL MODE: 'Source', 1, 0, 0, 1

Title: Re: HAIER Service mode
Post by: naxil on November 14, 2013,23:02:39

work for me the first code, the other method (2 and 3) are other menu or works for different model?

is possible damage tv with this menu?

exist a esaustive manual about the blue menu?

the options PVR RECORD ALL on/off  mean rec from pvr to all tv in (hdmi,pc,av)?

Title: Re: HAIER Service mode
Post by: jordan on November 15, 2013,02:59:06

http://electronicshelponline.blogspot.com/2012/07/haier-hl40bg-lcd-tv-service-mode.html#!/2012/07/haier-hl40bg-lcd-tv-service-mode.html

Title: Re: HAIER Service mode
Post by: watteau on November 15, 2013,05:05:39

Hi,
It depends on what you are accessing the service menu for.
Mostly it is to perform a factory reset, to eliminate software corruption
causing a problem with the television.
Most manufactures don't supply a list of the default values for their
service menus, so its always best to make a note of the current values,
before changing them, so you can revert to them, if any adjustment you
make causes any unforeseen effects.
And, yes the other options are for different models I have found.

Title: Re: HAIER Service mode
Post by: naxil on November 15, 2013,11:15:57

wattua, i have see some eeprom.bin for haier and are only 2kb, why are little? probably haier have the same base Firmware for all tv? and the eeprom file are only the value of setup?
Probably if i move some options (not designed for my tV) tv stop to works?

What i can do if i move some options and i can't see tv? how to reset setup on tv with 8,8,9,3?