Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: chrissie jones on July 03, 2011,11:39:08

Title: SAMSUNG 19 LCD MODEL 932MW.....CODE LS19MASF/EDC
Post by: chrissie jones on July 03, 2011,11:39:08

this set works fine untill picture dims then backlite goes out all togeather after 10 minutes...help please.

Title: Re: SAMSUNG 19 LCD MODEL 932MW.....CODE LS19MASF/EDC
Post by: sparky on July 03, 2011,14:05:10

hi
its the inverter transformer stock fault try wiltsgrove
dave

Title: Re: SAMSUNG 19 LCD MODEL 932MW.....CODE LS19MASF/EDC
Post by: michael first on July 04, 2011,02:01:35

hi,if it's mounted fan7314 as the inverter's controller,try to solder a wire between pin #1 and gnd;it works if the transformer is safe.

Title: Re: SAMSUNG 19 LCD MODEL 932MW.....CODE LS19MASF/EDC
Post by: chrissie jones on July 04, 2011,02:54:58

can you point out pin one for me please.

Title: Re: SAMSUNG 19 LCD MODEL 932MW.....CODE LS19MASF/EDC
Post by: michael first on July 04, 2011,05:07:37

hi,I'm sorry but I haven't a pic of it so look for the mark on ic's body(look for c624  mounted on pin #1);also,I have to point out the error I made,not a jumper but a 1k resistor!sorry