Mulja tv repair portal
Equipment Repairs => LCD TV forum => Topic started by: keeton on July 10, 2011,07:34:35
-
hi everyone just fixed the power board on this set it starts up with sound and picture .the problem is the picture is very blocky like its low signal dose anyone no how to enter the service menu thanks :41:
-
Try this:
Menu, 4, 7, 2, 5
-
hi mate do you do it from standby or when the sets on thanks
-
Bring TV out of standby. Press Menu button, OSD Menu will show on screen. Press 4, 7, 2, 5. Screen should automatically show Factory Mode - but it's a good idea to note down all the original settings before making any adjustments. I have a different TV but the Mainboard is the same as yours, so I reckon this should work, it's worth a try anyway.
-
thanks mate yeh it worked a treat thanks for your time :08:
-
No prob, glad to help - I got the info by asking, like yourself