Mulja tv repair portal
Equipment Repairs => PLASMA TV forum => Topic started by: Vlad on July 29, 2011,15:30:51
-
:051bye:
I check all fuses and capacitors all are OK
Light on control board lights on.
Any idea?
Thanks
-
I did some tests
VS - 438V
VA - 60V
M5V - 5V
To YSUS and XSUS is going the some voltage.
I have the TV switch on for last 30 min. The heat sinks on xsus starting to get a low heat but the ysus is still cold.
-
Ysus is still cold. All other boards are heating up.
Somebody has e service manual for it?
Ysus part number: EBR50038901
-
your vs cannot possibly be that high, recheck please
-
No it is showing me 438V
Maybe my meter is faulty. Will go today get a new one. I still need a spear.
-
I check it again with new meter and VS is 197V on both boards
-
excellent vlad, you had me worried then, i tried posting manual and compressed it still exceeds the limit, in any event it doesnt cover the sections you are likely to require. but when i get to work i will put one on the bench, one of our faulty stock and get the scope on it and report back
take care
tony walker
-
:08:
Thanks :13:
-
Oh that's very good, well as per my knowledge LG TV is always having picture problem. :sign0098:
-
Ysus is not the fault.
Control board is not the fault.
All buffers are ok.
There is only one more think AV board or the firmware.
If somebody has a firmware for this TV let me know.
-
what are the letters after model number
tony
-
50PG3000-ZA.ARUYLH
Thanks
-
If somebody has this board for sale let me know please
-
There is really nobody who has this board or firmware for this TV?
Please help
:sign0085: