Mulja tv repair portal

Equipment Repairs => PLASMA TV forum => Topic started by: WILLYAM1 on August 22, 2011,07:25:13

Title: profilo 42''-(42v7)
Post by: WILLYAM1 on August 22, 2011,07:25:13

Hi to all.
problem is blank screen and green led is lighting.
blowing fuse in y sus and in z sus.
 i replace it with 3 board  set now there is a pic but with horizental lines interference.
any idea??.
could it be a  boards thatare not suiteble?.
willyam1.
ill send a pic letter

Title: Re: profilo 42''-(42v7)
Post by: Ohm Supplies on August 24, 2011,04:53:22

Willy
What was the board number of the y-sus you removed?

Andy

Title: Re: profilo 42''-(42v7)
Post by: WILLYAM1 on September 02, 2011,07:44:49

thanks ohm.
seems that a new 3 rca to 3 rca cabel 10 meter is not pro and is attnuatting the signal i will buy a new pro cabel and see for result.
the boards that was in the tv are y-49d  z-45b c-066.
thanks willyam1

Title: Re: profilo 42''-(42v7)
Post by: Ohm Supplies on September 02, 2011,09:45:54

Are the lines there without the cable attached?

Title: Re: profilo 42''-(42v7)
Post by: WILLYAM1 on September 04, 2011,13:56:27

no.
put a new pro cabel and seems that all ok.willyam1