Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: jimca007 on August 26, 2011,18:23:19

Title: 23 inch philips lcd tv
Post by: jimca007 on August 26, 2011,18:23:19

Hi guys .. got a wee odd fault was wondering if anyone's had it before I attack it....When on free view after carrying out a service scan all channels present and correct, swith in and out of standby everythings fine. Power down first with the remote to standby and then turn off using the power switch it looses all freeview channels....its like theres a trickle cap down so its not feeding volatile memory but I always thought the channel list was saved into non volatile ram so powering down wouldnt effect it ... any ideas?

Title: Re: 23 inch philips lcd tv
Post by: daz on August 27, 2011,04:33:00

hi
sounds like a duff eeprom, i would try copying the data from the old one to a new one and see if that fixes the fault.
good luck
daz

Title: Re: 23 inch philips lcd tv
Post by: jimca007 on August 27, 2011,07:56:00

was kinda erring towards that myself the eeprom not taking the saved file but unfortunately my eeprom readers down just now so I'll need to wait till I order a new one thanks anyway

Title: Re: 23 inch philips lcd tv
Post by: astracat on August 27, 2011,17:03:45

hi
had several philips tv,s with same problem updateing software cured all of them
g/luck
astracat
ps what model is it ,this made with different screen makers and its a different update for each one.