Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: blackie1964 on September 05, 2011,06:09:03

Title: Alba lcd 32880H DF standby light flashing blue and red
Post by: blackie1964 on September 05, 2011,06:09:03

Hi my alba lcd 32880H DF tv wont turn on,stanby light flashing blue and red, if left unpluged for a while it will work fine for hours before it shuts off and flashes ,no visible signs of bulging caps, unpluging the mainboard from the psu board while turned on and pluggin straight back in also cures it for varing amounts of time but doent really tell me which board is at fault. The psu board is a 17pw26-4 and the mainboard is a 17mb45m-2 any ideas please.

Title: Re: Alba lcd 32880H DF standby light flashing blue and red
Post by: chrissie jones on September 05, 2011,06:42:41

sounds like cap problem..

Title: Re: Alba lcd 32880H DF standby light flashing blue and red
Post by: blackie1964 on September 05, 2011,07:17:12

Hi Chrissie that was my thought but none are obvious , i have no schematic and my meter wont test the caps ,other than change them all im lost ,im only a novice at this ,can anyone narrow it down please.

Title: Re: Alba lcd 32880H DF standby light flashing blue and red
Post by: chrissie jones on September 05, 2011,07:19:35

can you send me a piccie...

Title: Re: Alba lcd 32880H DF standby light flashing blue and red
Post by: blackie1964 on September 05, 2011,07:34:49

There you go Chrissie hope it good enough

Title: Re: Alba lcd 32880H DF standby light flashing blue and red
Post by: chrissie jones on September 05, 2011,07:41:46

have you check the nain smoother or replace....150uf/450volt..allso i have a power supply the same bar for one number.instead of 17PW26-4..MINES 17PW26-3.I DONT KNOW IF THERES ANY DIFFERENCE.

Title: Re: Alba lcd 32880H DF standby light flashing blue and red
Post by: blackie1964 on September 05, 2011,10:01:56

ok chrissie i have swaped it out with a 150uf/400v it was the nearest to hand borrowed from a working pc psu ,it is work at mo but can last around 12hrs b4 giving up, if it keeps working will order a replacement,will post results later.

Title: Re: Alba lcd 32880H DF standby light flashing blue and red
Post by: blackie1964 on September 05, 2011,10:06:10

Oh that was short lived it died already

Title: Re: Alba lcd 32880H DF standby light flashing blue and red
Post by: blackie1964 on September 11, 2011,05:51:16

Hi all just a quick update bought another psu board on ebay but no different Grrrrrrrrrrrr must be the main board

Title: Re: Alba lcd 32880H DF standby light flashing blue and red
Post by: fix2003 on September 13, 2011,02:48:16

how good was your replacement board ??
have you tried replacing  C230 C231 5pf 3kv disc ceramics, on combined PSU and Inverter.
had this twice now

Title: Re: Alba lcd 32880H DF standby light flashing blue and red
Post by: blackie1964 on September 18, 2011,11:09:06

I dont seem to be able to find those on my board , there is a pic my board a few posts up ,could you please give me a clue to there location, thanx

Title: Re: Alba lcd 32880H DF standby light flashing blue and red
Post by: Afrad15 on September 23, 2011,07:52:10

Hi Chrissie that was my mentation but service are evident , i hold no diagram and my meter custom endeavor the caps ,different than locomote them all im people ,im exclusive a novice at this ,can anyone bare it mastered please.

Title: Re: Alba lcd 32880H DF standby light flashing blue and red
Post by: blackie1964 on October 01, 2011,13:30:07

Hi all tv finally sorted, sent power board back to seller for test ,even thou they insisted it was tested before sale ,and guess what yes it was faulty Grrrrrrrrrrrr ,Replacement sent and now working fine  :yahoo: . Thanx for all your input   :thumbup: