Mulja tv repair portal
Equipment Repairs => LCD TV forum => Topic started by: davenjax on September 10, 2011,04:18:35
-
hi chaps i have this one with bad picture interfearence on on screen graphics and if using sky through hdmi strange thing is if i use a ps3 through hdmi the picture is perfect although on screen menu graphics although not corrupted still have a square section of interfearence through them any thoughts greatly appreciated :sign0085:
-
lots of sammys seem to suffer from eeprom probs could try shortin 5&6 to reset it see if it irons out the fault either that or possibly the tcon....
-
hi jimca007 thanks for your reply the first iv had for a while. iv never done the eeprom reset before whats the procedure do i need to short it while its running or short it first then run it ? cheers mate .dave
-
Hi
It's best to erase the eeprom or fit a blank one. I find they can be erased in circuit. But I think it is more likely to be the Tcon board.
Keith
-
to erase/reset the eeprom you solder 2 longish wires onto pins 5 and 6 of the eeprom. join the wires re assemble power up the set ( switch on ) although the set won't actually turn on ! switch off and disconnect power remove wires and re assemble . start as usual . its actually quite straight forward dave . I've done it a few times and most times its helped when its been weird faults.
-
The Samsung LE40R51B allows the viewer to undergo the crowning in Plate Amusement without flexible interval and music.
As included on most of Samsung's LCD TVs the LE40R51B features the excerpt progress HDMI (Squeaking Definition Transmission Programme). This new connector allows elementary one telegraph connectivity from PDP to encircling products and transfers 100% of the collection thus providing the perfect wholesome and vision have.
-
hi guys thanks for the replys just for info purposes tcon changed with no effect gonna try the eeprom .dave
-
just as an after thought might be an idea to turn down the hdmi resolution from 1080 to 576 see if your pic clears up could be the input source isnt compatible with your screen resolution settings
-
join the wires re piece powerfulness up the set ( change on ) though the set won't actually channelize on ! shift off and disconnection power disappear wires and re tack . start as usual . its actually quite person presumptuous dave . I've done it a few times and most nowadays its helped when its been weird faults.