Mulja tv repair portal
Spares => Spares to buy => Topic started by: chrissie jones on September 17, 2011,04:25:26
-
this set comes with sound but no picture,no backlite.24volts ok to inverters,smd fuses on inverters ok.any idears lads....
-
check the inverter transformers with meter ohm reading
will tell which is faulty or change panel posted in wrong section
dave
-
What chassis is in it? If it's Vestel backlight on/off and PWM drive for dimming come via the psu. What other voltages do you have to the inverter other than the 24v supply? There should be one pin at 3.3v and another at 2 to 3v (not some Chi Mei screens).