Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: dougc on October 14, 2011,08:11:10

Title: anyone recognise this chassis?
Post by: dougc on October 14, 2011,08:11:10

Hi, Anyone recognise attached chassis? It is in a Matsui m26dvdb19 for which I need to access service mode. Cheers, Doug

Title: Re: anyone recognise this chassis?
Post by: daz on October 14, 2011,08:16:39

it looks similar to that wharfedale you had in a few days ago, perhapse hame codes?

Title: Re: anyone recognise this chassis?
Post by: dougc on October 14, 2011,08:37:03

Thanks, but already tried that one!

Title: Re: anyone recognise this chassis?
Post by: watteau on October 14, 2011,10:17:53

Hi,
It's a 'Cello' chassis, you might try: http://contrast-uk.net/cello.html,
they have a technical help, might be worth a try,
Regards,
John

Title: Re: anyone recognise this chassis?
Post by: dougc on October 14, 2011,11:05:21

E-mailed Cello and apparently only Cello engineers are allowed such information!!   

Title: Re: anyone recognise this chassis?
Post by: dougc on October 16, 2011,03:39:43

Has anyone any info on Cello/Neon service menu?

Title: Re: anyone recognise this chassis?
Post by: AGC on October 16, 2011,06:07:40

You can look here, or ask  a question.
 http://www.fixya.com/tags/matsui_tv_remote_code
 

Title: Re: anyone recognise this chassis?
Post by: astracat on October 18, 2011,16:39:57

hi , looks similar to dmtech i repaired  try display 1 1 av input
g/luck
astracats

Title: Re: anyone recognise this chassis?
Post by: dougc on October 19, 2011,04:57:49

Thanks Astracats, Not that one either - really struggling on this one!! Doug.

Title: Re: anyone recognise this chassis?
Post by: watteau on October 20, 2011,03:46:29

Hi,
I've seen, 'Source', 2, 5, 8, 0, suggested, but haven't tried it myself,
Regards,
John.

Title: Re: anyone recognise this chassis?
Post by: dougc on October 20, 2011,07:13:17

Thanks John, Not that one either!! Doug

Title: Re: anyone recognise this chassis?
Post by: t1412 on October 20, 2011,17:36:00

ok doug you still got that 17pw20 power board 4 sale thanks

shaun

Title: Re: anyone recognise this chassis?
Post by: dougc on October 20, 2011,18:30:02

Hi Shaun, I'll check in the morning, Doug.

Title: Re: anyone recognise this chassis?
Post by: dougc on October 20, 2011,18:36:07

Hi Shaun, Yes I still have 17pw20-1.

Title: Re: anyone recognise this chassis?
Post by: vicvc on October 21, 2011,02:11:22

Looks similar to a few Chinese chassis I've had my hands on and each of them was different access due to software written for various manufactures. But it woun't hurt to try Menu 1147 or Menu 9527.Depending on your direct problem(why you want service mode), try a work-around. eg.Blanking (external) of 24c32/64 can cure a few ails on these.(remember to backup b4 blanking for in case you want to revert).