Mulja tv repair portal
Equipment Repairs => LCD TV forum => Topic started by: scooby-doo on November 11, 2011,05:44:23
-
Hi
Another Philips Fault...The set is as dead as a door nail...No standby light, Internal fuse ok, no voltages out of any of the pins going to ssb
The PSU is DPS168BP
Any pointers on this one please.
-
hi scooby doo,
there are some safety resistors.
check if one of them is faulty.
kind regards
-
hi
what are the circiut ref might help,
always plenty of safety resisters
dave
-
hi scoobe
can we see the picture of power board i did some philips with no power .
-
Thanks for your replies...another school boy error...tested one of the fets...psu not discharged properly....big pop as I shorted it and took it out...waiting for a new one to come and will test resistors once I replace blown fet
Cough Cough...a couple of pointers of which resistors would be nice :-)
-
hi scooby
the only psu fault i have listed is on the 32 inch ver. i think its the same psu,check d080
good luck
daz
-
Thanks Daz will check when I get the parts through