Mulja tv repair portal
Equipment Repairs => PLASMA TV forum => Topic started by: yellowpinky on November 24, 2011,09:54:54
-
Hello Group,
This set had intermitent start up, but is now dead with the relay clicking.I have replaced the power supply board (bn44-00269a),but no change.I suspect the signals board (bn41-01190a).Has anyone had this problem.
Any help appreciated.
Many thanks Ian harrison.
-
hi
have you checked the eeprom chip if it has one or it
could be a software fault check samsung consumer
page some of downloads are free and go thro the usb skt
dave
-
Hello Dave,
Where do you find the Samsung consumer page ?
Thanks Ian.
-
google
samsung home page it tells you all the free downloads
once you but the model in i think its all done with usb
stick
dave
-
Thanks Dave.
-
Hello All,
I have tryed the Samsung site, but it was no help.
I did try disconnecting the lead from the power supply to the signals board and the backlights lit up and the power supply stoped cycling on and off. Has anyone a circuit for the signals board (BN41-01190a) or able to identify the eeprom
-
Hi,
I don't think you'll find any circuit for the main pcb, but this might help.
http://www.megaupload.com/?d=ZLPM0J0G
regards,
John
-
Hello John,
That web site looks helpfull.
I will tackle it again this week
Many thanks Ian.