Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: chrissie jones on November 28, 2011,07:45:32

Title: PANASONIC plasma TH-42PV500B
Post by: chrissie jones on November 28, 2011,07:45:32

relay goes click.standby lite comes on,then starts flashing 10 to 12 time then clicks again then goes dead......help...

Title: Re: PANASONIC plasma TH-42PV500B
Post by: brainstorm on November 29, 2011,08:27:15

Hi
You need to count the blinks, that might tell you the fault area

Brian

Title: Re: PANASONIC plasma TH-42PV500B
Post by: chrissie jones on November 29, 2011,08:28:46

blinking to fast....brian

Title: Re: PANASONIC plasma TH-42PV500B
Post by: tv tony on November 30, 2011,10:16:48

now unlocked, hope i did right

Title: Re: PANASONIC plasma TH-42PV500B
Post by: brainstorm on December 02, 2011,05:14:34

Hi

What colour is the flashing LED?
Green or Red?

I suspect you will have to do some voltage checks.
You need to be fairly experienced to take on plasma repairs, they are not for the faint hearted!

Brian

Title: Re: PANASONIC plasma TH-42PV500B
Post by: chrissie jones on December 02, 2011,06:30:14

its red.brainstorm..dont like plasmas....

Title: Re: PANASONIC plasma TH-42PV500B
Post by: brainstorm on December 02, 2011,07:15:21

Hi
If its flashing red then they normally flash in a sequence and then there is a pause and then the sequence  starts again, try counting again, if you really can't count them, then start by checking all your PSU voltages

You will definitely need a service manual

Brian