Mulja tv repair portal
Equipment Repairs => LCD TV forum => Topic started by: rs007 on November 29, 2011,12:06:18
-
Similar to my other thread here - http://www.tv.quuq.org/forum/index.php?topic=5790.0 I also have a 20" Cello TV with built in DVD player which has a similar (symptoms I mean) issue.
Stuck in standby.
You hit the power button on the TV, and the Standby light goes out for a few seconds but nothing powers up - then it comes back on. No "power on" light comes on at any time.
This TV has an external power pack, and I am using a substitute so it can't be power board or anything like that - I assume?
I am not sure if I can see the screen flickering ever so slightly between the states, like you might get if the full black screen was activating - without a backlight - could be my imagination.
Any ideas on this, and my other thread, would be very greatly appreciated!
-
Hi RS,
Any panels/piccies to be supplied ? - Chris
-
Hi R/S
Had a cello 22" today, when powered on screen flickered very briefly and nothing else.
There was a small power board inside with 3 faulty 1000uf 25v caps, didnt look faulty but esr showed them up.
Replaced the 3 and all was good again.
Hope this helps
John