Mulja tv repair portal
Equipment Repairs => LCD TV forum => Topic started by: kbs on December 07, 2011,10:24:09
-
HI , Just installed and set up the above TV in cust,s house, How do you switch this set from Digital to Analog mode (cust as tv in bedroom and whats to watch sky feed from is front room) I have read the manual but cannot find it mention anywhere , cheers.
-
HI
some dont switch between analogue and digital they autotune them in to around channel 900
usually bbc1 will appear on channel 901
good luck
daz
-
Cheers for the quick reply Daz will call into cust tomorrow and give it a try , will let u know how i go on
-
If the customer is just sending sky up to bedroom to bedroom tv by rf by coaxial to tvs aerial socket.YOU WONT HAVE FREEVIEW,ONLY SKY SIGNAL.just do an auto tune as per normal and tv will pick sky up usually around channell 68/69. Hope this helps you, Good luck.
-
Sorry took this to be a non digital set,set should find sky signal but to my limited knowledge,will not be on digital side. customer will have to switch set to analogue,useually marked A/D on remote,or go to AV,and select atv from there and set useually puts first analogue signal ,ie sky. on number 1.
-
It varies so much from one set to another.
Sometimes there's a tv/dtv button
Sometimes (samsung a lot) the analogue channels appear in the same list as digital ones. Often go to freeview channel 1, then press the channel down button and it takes you to the analogue channels
On other sets you have to bring up the AV source menu, and TV and DTV will be listed along with all the AV sources (often not even listed side by side)
-
Cheers Daz, Bob on, just been back to cust house and sky was tuned in on channel 902 Thanks again
-
Whos the daddy :72: