Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: pan on January 11, 2012,16:44:34

Title: Picture Fault Hitachi L32H01UA
Post by: pan on January 11, 2012,16:44:34

Hi
I’ve a prob with a Hitachi L32H01UA the images are blurred.
But if the image is a still one, (test pattern) then its fine.
The brightness and contrast are set to max.
Any help much appreciated.
Pan

Title: Re: Picture Fault Hitachi L32H01UA
Post by: tom66 on January 12, 2012,04:31:36

Could be T-con or panel - I'll vouch for T-con as I've seen this problem before and it affects the whole screen. Most panels are divided into two halves (hence two connectors from T-con) so if the problem is on both sides it's common to both sides. If it's the panel though, still might be repairable, as some Sony LCDs with half the screen blurry can be fixed.

I see posts on the 'net suggesting it is a firmware problem, but I doubt that.

Title: Re: Picture Fault Hitachi L32H01UA
Post by: pan on January 12, 2012,09:10:50

Hi
Thanks for your reply Tom.
Yeah I’m opting its T-con also. 
Pan

Title: Re: Picture Fault Hitachi L32H01UA
Post by: jimca007 on January 12, 2012,13:25:21

many of the hitachi 32's were Vestel clones with pretty common display panels pop up a pic and part no of the t con and I'll have a look see what I've got cheers

Title: Re: Picture Fault Hitachi L32H01UA
Post by: pan on January 17, 2012,11:41:11

Hi

They don’t want the repair now carried out.
They’ve opted for a new one.
Thanks to everyone for your help.
Pan