Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: marky mark on February 05, 2012,15:59:21

Title: LE46M87BD, stuck in stand by
Post by: marky mark on February 05, 2012,15:59:21

Hello,  :sign0144:

We have one of these sets in, its stuck in stand by and taking ages to come on. When it does, the picture is sort of shiny and the hdmi port on the side doesnt work.
 Anyone know before i take the back off what might be the problem?

Thanks
Marky   :051bye:

Title: Re: LE46M87BD, stuck in stand by
Post by: Kilroys on February 08, 2012,07:16:16

The power supply
BN44-0166C
Look for bad caps.
Think one is named CM817.

Title: Re: LE46M87BD, stuck in stand by
Post by: sparky on February 09, 2012,03:52:09

there is more than 1 to change and prob eeprom will need resetting in service mode
check back on previous listing its been gone thro several times bit of
a bind to search it out but worth it with amount of information
might have to replace eeprom
dave

Title: Re: LE46M87BD, stuck in stand by
Post by: marky mark on February 09, 2012,14:05:33

Yup.

Cheers for that guys, took the back off and seen the caps. Should save some dosh as i wont have to call out the repair man, its to good a set to throw away so i'll have a crack at it myself :86:

I'll let you know if I get stuck.

Marky

Title: Re: LE46M87BD, stuck in stand by
Post by: marky mark on February 11, 2012,15:33:49

All done  :08:

Changed a couple of capacitors that looked funny to the rest and the tv is up and running, we bought another so it will be a nice telly in the bed room and didn't have to waist money on some engineer bloke trying to rip me off telling me it was a "big job"   :brinda:
thanks again,

marky  :sign0066: