Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: chrissie jones on March 01, 2012,11:29:03

Title: SHARP LC40LE600E..IN STANDBY
Post by: chrissie jones on March 01, 2012,11:29:03

the guy said he turned over and set went to standby...any clues

Title: Re: SHARP LC40LE600E..IN STANDBY
Post by: sparky on March 01, 2012,13:26:42

no

Title: Re: SHARP LC40LE600E..IN STANDBY
Post by: chrissie jones on March 02, 2012,02:18:51

thanx !!!!!

Title: Re: SHARP LC40LE600E..IN STANDBY
Post by: fix2003 on March 02, 2012,02:46:24

are all the psu voltages up and runing ?

Title: Re: SHARP LC40LE600E..IN STANDBY
Post by: Kilroys on March 02, 2012,03:40:48

Is this the first LED backlight on the forum ?
The mainboard must be ok, then the on/off led could show a error code.
I think you must press a button on the remote.
 
Blinking display when error is detected
When system received error report, Standby LED (red) blinks as follows.
POWER LED should keep dark while error indication.

1) Lamp error
Blink timing (1 blink/1 period)
2) Power module error
Blink timing (2 blink/1 period)
3) High temperature
Blink timing (5 blink/1 period)