Mulja tv repair portal
Equipment Repairs => LCD TV forum => Topic started by: Nightlight on March 04, 2012,03:31:35
-
As per my last post this set had clicking relay problem...Re-capped the PSU board replaced eprom etc still the clicking
so...
I replaced the signal board, ( BN94-01260C ) with a BN94-01260A (all I could get my hands on) this cured the relay clicking problem BUT I cannot access the service menu, when I try info,menu,mute,power the set comes out of standby with the set's red power led flashing for a few secs then the backlight comes on and the led goes off, blank screen..thats it nothing else :(
any ideas???
cheers,
Night....
-
hi
this make samsung? look at previous listing will tell you
you should put the correct board in try EMOS they will
replacement boards
dave
-
:oops: Thanks Sparky, Samsung it is and now corrected
Thanks for the info I'll give them a call
Night...
-
Hi
If your struggling I have one of these sets with a popped screen...give us a shout if you need anything.
Hope this helps
-
PM on it's way scooby... :c017:
-
Hi Nightlight
The TV I have is a LE40M87BDX...sorry the main board in the tv is BN41-00813E sorry
-
Oh well, thanks for your time anyway Scooby-doo :)
Maybe I'll get lucky soon
thanks again,
Night....
-
Just done a little searching on the net and it looks like the boards are the same
http://www.sendz.co.uk/samsung---bn41-00813b---bn94-01260c---main-av-347-p.asp
See what you think I have attached a picture for you to view
-
wow thank you Scooby-doo,
Yup that looks like the beast mate, Can you please send me an email or PM with your price, inc P&P with your preferred method of payment and I'll get the mullah off to you right away :)
yer a star mate,
Night....
-
pm'd you