Mulja tv repair portal

Service manuals & datasheets => PLASMA TV forum => Topic started by: chrisac on November 26, 2007,16:40:29

Title: lgids software ,lg42pc1da-ec
Post by: chrisac on November 26, 2007,16:40:29

hi all i recently sent a post requsting if anyone had a service manual, for the lg42pc1da-ec / lg42pc1da  model plasma tv,
i have just bought the above service manual, and i will be uploading it to this site in due course,
i am however in need of the lgids software,
any help would be greatly appreciated

thanks

chrisac

Title: Re: lgids software ,lg42pc1da-ec
Post by: mulja on November 27, 2007,06:23:07

I upload all new software to update plasma tv  LG42PC1DA

But you  must have Service remote control,RS232 cable and adapter to do that.

Title: Re: lgids software ,lg42pc1da-ec
Post by: mulja on November 27, 2007,08:11:41

Second part:

Title: Re: lgids software ,lg42pc1da-ec
Post by: chrisac on November 27, 2007,12:15:13

hi mulja,

many many thanks,

have you got the service manual on here, i did look but i couldent find it,
if not i will gladly upload it , i bought it yesterday the size is approx 12mb in pdf

regards

chrisac

Title: Re: lgids software ,lg42pc1da-ec
Post by: chrisac on November 27, 2007,12:21:23

hi mulja,

appologize for down loading it so many times, it just didnt show up where i had downloaded it to,
i will switch computer over to other op sys (xp) much better than this vista and try again

many thanks

chrisac

Title: Re: lgids software ,lg42pc1da-ec
Post by: wonderboy on May 15, 2008,18:37:03

Hi was just wondering if you could post the service man for the 42pc1, Thanks

Title: Re: lgids software ,lg42pc1da-ec
Post by: mulja on May 16, 2008,09:43:28

Download here:

http://www.tv.quuq.org/index.php?ind=downloads&op=entry_view&iden=582

Title: Re: lgids software ,lg42pc1da-ec
Post by: chrisac on May 16, 2008,16:24:18

hi wonderboy,

i have tried to upload it but it comes up with an error, i see there has already been a link posted,
but i will up load it direct to the service manual section in the next few hours if i can get it to accept it


best regards

chrisac

Title: Re: lgids software ,lg42pc1da-ec
Post by: chrisac on May 16, 2008,16:43:31

hi all the manual is now in the download section

regards

chrisac

Title: Re: lgids software ,lg42pc1da-ec
Post by: tv tony on May 20, 2008,15:18:12

hello. actually the service r\c is not needed for the cortez and hudson downloads, to put the set in burn in mode it is, so sorry for butting in, we are lg main dealers and if u are in the uk we may lend your our adapter , along with a appropriate s\ware. its a bit tricky to do but lg supply step by step instructions if required, hope this helps
thanks for reading, tony walker

Title: Re: lgids software ,lg42pc1da-ec
Post by: tv tony on May 20, 2008,15:21:33

also what is a 42pc1, im curious, not rude, is it none uk, thanks, pc1d, 42pc1da im familiar with, but not 42pc1, please reply

Title: Re: lgids software ,lg42pc1da-ec
Post by: wonderboy on May 20, 2008,18:19:37

Hi thanks for the upload, the set is a 42pc1da was just being a bit lasy with the 42pc1.

Title: Re: lgids software ,lg42pc1da-ec
Post by: wonderboy on May 20, 2008,18:25:39

anyone any ideas? 42pc1da

Title: Re: lgids software ,lg42pc1da-ec
Post by: tv tony on May 24, 2008,03:14:29

think i can help, is the panel an x2 or x3? the px5 used both

Title: Re: lgids software ,lg42pc1da-ec
Post by: wonderboy on May 25, 2008,09:09:15

Hi Tony it is an x3