Mulja tv repair portal
Equipment Repairs => LCD TV forum => Topic started by: insomnia on May 11, 2012,08:08:04
-
hi i seen post before about this set that there is a bad eeprom i have changed caps etc and put new eeprom now it does turn on for about 20 seconds then back of and on is there something i have to do to program the eeprom
-
After replacing capacitors in PSU appliance shuts down after start-up.Eeprom replaced,but appliance shuts down about 20 sec.Enter SERVICE MODE and OPTIONS MENU change READY to ON
Enter service mode:
STANDBY,INFO,MENU,MUTE and POWER buttons on RC
-
i will try that now jordan and post results many thanks
-
thank you very much that worked :72:
-
You meet a friend in problems :33: :72: :08: :051bye: