Mulja tv repair portal
Equipment Repairs => PLASMA TV forum => Topic started by: Cornboats on May 18, 2012,12:51:37
-
Hitachi plasma 42PD4200
I've got an intermittent picture fault. Full sharp colour picture goes to blur and ghosting for 5 seconds and then back to full colour.
I thought it was LVDS board but swopped and no difference made.
VA & VS voltages spot on.
Any ideas would be welcome.
-
Check or change SMD electrolit capacitors on Y-SUS board C-18,C-36,C-72 all 33uF/25V
-
Many thanks for replying. I check out over the weekend and let you know.
I've a lot to learn- What made you suspect these?
-
I've checked all 3.
they are 33mf, 28mf, 102mf.
are these electrolytic?
my esr meter doesn'tseem to work on them.
-
I checked the 15V rail and its only 117.-11.9V. I was told it came from the Y-sus board but not sure where to look.
Any ideas anyone?
-
I changed z -sus . Got picture and sound and 15v rail. Thought "jobs a good en."
Turned on to find very dark picture highlighted in red.
I'll close this thread and open a new one with new problem.