Mulja tv repair portal

Equipment Repairs => PLASMA TV forum => Topic started by: Cornboats on May 31, 2012,12:20:30

Title: Samsung Plasma -no picture/sound -just clicks
Post by: Cornboats on May 31, 2012,12:20:30

Samsung 42SD 5SD- plasma 42"

No picture or sound. Turn it on, clicks  and the neon flashes 5 times and then goes off. re-cycles until you turn off at mains.

It did have picture and sound but had vertical lines and occasional horizontal dashes. I never got to the bottom of the first fault before the second one took over.

I've disconnected z-sus and Y-sus boards 1 at a time but no difference.

Va and Vs voltages as per label.

Where do I go from here?
Anyone offer any advice-it would be welcome.

Title: Re: Samsung Plasma -no picture/sound -just clicks
Post by: zica on June 03, 2012,14:19:22

Have you checked the fuses on z-sus and Y-sus boards?

Title: Re: Samsung Plasma -no picture/sound -just clicks
Post by: Cornboats on June 04, 2012,04:29:09

Yes that was my first check.