Mulja tv repair portal
Equipment Repairs => CRT TV forum => Topic started by: moonpak on June 19, 2012,04:26:39
-
Dear Sir,
any suggestions with this problem??the set runs for about 10 seconds then shut down..
Best Regards
Saeed Ahmed
-
Hi
When its shuts down does the LED blink?
Do you get a picture before it shuts down?
Brian
-
Thanks for reply,
Dear it jest power on and speedly off no LED blink & not picture or light,
jest ht volt feel then off.
Best Regards
Saeed Ahmed
-
Hi
I think I understand what you were trying to say, Try disconnecting the HT supply to the line stage and fit a 'dummy' load(100w light bulb) and see if Ht stays up
If it does then likely to be either a S/C on seconadry of line output stage or line output transformer itself
Brian
-
Dear Brain,
Yes you are right power supply is ok, The one balsting spot on flyback transformer. So now i serching for transfomer becouse it is very old model my be not found in our country. any way thank you very much for help me.
Thank & Best Regards
Saeed
-
I have Lots of FBT.