Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: zica on June 24, 2012,10:32:33

Title: Nordic 32" LCD. Stuck in standby
Post by: zica on June 24, 2012,10:32:33

Hi!
Tv is stuck in standby. I dont get any "ON"-signal to power supply.
Brand: Nordic
Model: 32NS08

(http://img855.imageshack.us/img855/2017/cimg0145o.th.jpg) (http://imageshack.us/photo/my-images/855/cimg0145o.jpg/)
(http://img854.imageshack.us/img854/2382/cimg0146r.th.jpg) (http://imageshack.us/photo/my-images/854/cimg0146r.jpg/)

Does someone have eprom dump for this. (Eprom:EON F80-100HCP)
or have any clue what could be the problem. Any known problems?

Powersupply are OK.
Voltageregulators on mainboard seem ok. 3.3v 1.8v 1.24v and 2.5v
I've change 256-pin processor and some caps on mainboard.
Osc to processor are ok.

Mainboard: Grundig XLB190R-11
Powersupply: Grundig FSP204-2F02
Panel, Inverter and T-con: Samsung

Title: Re: Nordic 32" LCD. Stuck in standby
Post by: sparky on June 24, 2012,11:02:12

hi
you have been busy only fault i have had are caps on psu under heat sheild
dave