Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: needsomehelp on August 14, 2012,11:42:21

Title: Technika 42" LCD
Post by: needsomehelp on August 14, 2012,11:42:21

Hi Guys,

Really need some help if possible. I have a 42" technika about 3 years old. Was working ok this morning but when i went to use it this afternoon i switched it on to only see the screen flashing from blue to green to red in a cointinous loop. I have switched it off at plug for a while but nothing seems to work. Looks as if its stuck in a sort of test mode? Any ideas guys? Thanks in advance.

Title: Re: Technika 42" LCD
Post by: jordan on August 14, 2012,11:51:38

Mistakes are different of model to model. Your machine has mark? ? ?

Title: Re: Technika 42" LCD
Post by: sinclairtv on August 14, 2012,14:23:45

Unless you are going to put in a model no, you're wasting our time..but..theres a Sharp that has this same 'test mode' fault and if you press the 'menu' button on the remote, that clears it.

Title: Re: Technika 42" LCD
Post by: sparky on August 14, 2012,16:17:34

hi
with tv on in fault mode you must have orignal remote
just press menu on tv remote then put it in standby
then switch on fault cured
dave

Title: Re: Technika 42" LCD
Post by: kennyc on August 19, 2012,07:51:38

if it has got the same remote as a sanyo it is probably that has gone faulty and it messes the tv up .to clear it you need another remote . check back on previous sanyo posts its their on one of them

Title: Re: Technika 42" LCD
Post by: kennyc on August 19, 2012,08:01:01

jf you type in sanyo on the search box and look for the post by sinclair on march 12,2011 he explains it better than me