Mulja tv repair portal
Equipment Repairs => LCD TV forum => Topic started by: chrissie jones on August 22, 2012,06:11:09
-
had this set in today with 2 1000uf caps buldged.changed them but still suck in standby..can you help please.
-
CB-852 (2200uF) on STBY line
-
did you reset the eeprom after doin the caps Chrissie had a couple where the eeprom seems to lock in standby when low voltage from duff caps is detected.Short 5&6 start it up shut it down removed short and bobs your aunti
-
hi
its all been posted before the cure many many times just
check previous listing
-
Sparky when you get to old plus VAT a wee helpful prob to the memory cells does little harm !