Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: chrissie jones on October 29, 2012,05:04:55

Title: SONY..KDL-32U2000
Post by: chrissie jones on October 29, 2012,05:04:55

hi guys..please can you help...got this set in today.when you plug it in theres no standby lights just a very small whinning sound for psu....i dont do mutch with sony....thanx chris.

Title: Re: SONY..KDL-32U2000
Post by: jordan on October 29, 2012,09:00:03

Chassis SE1
No 5V standby voltage
Replace IC (STRA6169) and the five electlolytic capacitors around it (in standby supply)

Title: Re: SONY..KDL-32U2000
Post by: chrissie jones on October 29, 2012,09:35:56

THANX A MILLION JORDAN.... :051bye:

Title: Re: SONY..KDL-32U2000
Post by: chrissie jones on October 30, 2012,08:44:17

jordann i changed the part you said but still the same,whinning noise and nothing els...

Title: Re: SONY..KDL-32U2000
Post by: jordan on October 30, 2012,13:52:22

Check IC-6001 (TL431)-primary PSU
Check JW-6022 (4,7R) in series between L-6005 and R-6001 (0R) near IC-6000
Replace fast recovery diode D-6202

Title: Re: SONY..KDL-32U2000
Post by: t1412 on October 30, 2012,15:27:56

hi chrissie the whining sound may coming from the transformer they do this when they detect low voltage, i'd test any diodes near by also any caps as well good luck

regards
shaun   

Title: Re: SONY..KDL-32U2000
Post by: chrissie jones on October 31, 2012,02:52:37

thanx for the info...