Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: SlyAKs on November 15, 2012,17:59:56

Title: Goodmans GLCD32WDVBT stuck in standby..
Post by: SlyAKs on November 15, 2012,17:59:56

Any ideas? Checked psu and changed a few visibly bad caps... tv is in standby and doesn't respond to remote or power button on side, not even a dimming of led... It seems like the main board isn't telling the power board to give it the beans.. I've read on this forum that the eeprom can become corrupted.. Tried unplugging it but tv still would not turn on.. Main signal board issue?

Title: Re: Goodmans GLCD32WDVBT stuck in standby..
Post by: jordan on November 16, 2012,03:44:58

Chassis 17MB08P/Vestel
Replace both 15nF capacitors behind transformer on PSU

Title: Re: Goodmans GLCD32WDVBT stuck in standby..
Post by: SlyAKs on November 16, 2012,03:57:29

Many thanks for the reply Jordan... I ordered those caps yesterday, so should be here today/tomorrow.. I assume they are a common failure? Hope they are the problem.. Thanks again, Sean.

Title: Re: Goodmans GLCD32WDVBT stuck in standby..
Post by: SlyAKs on November 21, 2012,15:23:17

15nf caps made no difference at all.. are we looking at a main board fault?