Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: brownfunny1 on January 12, 2008,01:28:18

Title: PHILIPS 26 LCD
Post by: brownfunny1 on January 12, 2008,01:28:18

 I HAVE A 26PFL5322D 26"LCD. IT DOESN'T START, I PUSH POWER THE BLUE LIGHT TURNS ON THEN GOES OFF AND THE RED LIGHT STARTS BLINKING. DOES ANY ONE KNOW WHAT'S WRONG?? I WOULD REALLY APPRICIATE YOUR HELP.

Title: Re: PHILIPS 26 LCD
Post by: evan on January 17, 2008,12:33:44

if its like mine flashing red constantly at 3hz then its probably in protected mode which prevents the set from starting up, get the service manual if you can and look up the code to read the error buffer which is inputted with a certain number sequence from the remote control, it's could be power suplpy related like mine but
the error code should give you more of a clue.

regards

Title: Re: PHILIPS 26 LCD
Post by: brownfunny1 on January 19, 2008,02:45:27

thanks for the advise buddy.... ;D