Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: Turnip on December 06, 2012,12:33:35

Title: Vestel 17IPS15-4 Power/Inverter
Post by: Turnip on December 06, 2012,12:33:35

Hi Folks,

Note that original PS chopper was a STR-W6253, and the most available replacement is STR-W6253D.

Published data tends to indicate it's indentical, but it doesn't seem to work in this P/S.

Any thoughts - Chris.

Title: Re: Vestel 17IPS15-4 Power/Inverter
Post by: Keith on December 07, 2012,04:43:49

Hi Chris,

Maybe the fault is elsewhere!
Where did you get the IC from? I always use Wiltsgrove as I have had Chinese fakes from Ebay that just don't work.
What are the fault symptoms?

Keith

Title: Re: Vestel 17IPS15-4 Power/Inverter
Post by: EARLYBIRD on December 07, 2012,09:57:06

Hi Chris


 A new panel is only around £20 from Chas Hyde for account holders.Hope this helps.Earlybird

Title: Re: Vestel 17IPS15-4 Power/Inverter
Post by: Turnip on December 15, 2012,11:12:31

Thanks Keith and Earlybird,

I normally replace that power/inverter board as there are plenty on FleaBay, and inverter tranny is always suspect.

In a slack moment, thought to check my pile of duff panels, and found that using the replacement 'D' version, the panels didn't fire up at all, whearas the non 'D' version provided secondary outputs.

Always use Wiltsgrove, although they're not too helpful on replacement RCU info, where you have to buy one to find the replacement code number, then might find you have a heap of 'em on the shelf.

Otherwise, not too useful as I can't get replacement inverter trannies, as they were supply deleted by ChasHyde a while ago. Note some info on Eastern European sites but.

Thanks again - Chris.

PS - Forgot to mention, tranny is 30052713