Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: WILLYAM1 on January 18, 2013,04:12:33

Title: pilot 32''-pil329ch
Post by: WILLYAM1 on January 18, 2013,04:12:33

hi.
problem is that ther is backlight but no osd no pic.
all voltage from p.s ok all small reg in main ok  smd fuse in tcon ok.
main board is JUC7.820.265-2.
COULD IT BE THE EEPROM OR OTHER IC THAT CONECTED TO SOFTWARE?.
WILLYAM1

Title: Re: pilot 32''-pil329ch
Post by: hankmarvin on January 19, 2013,09:12:08

hello do you havea scope to hand ?  service manual ? ill help you ok

Title: Re: pilot 32''-pil329ch
Post by: WILLYAM1 on January 21, 2013,02:35:36

hi.
got scope no signals in lvds cabel all volltage frome p.s ok small smd fuse in tcon ok.
all volltage inmain board ok 3.3 2.5 1.2 5 12 .
coult it be a software problem ?.
i got another nain board from another 26'' but i know that this main is not ok so not shure if the main controller is bad or somthing alse .
i changed the eeprom and it coming back to stby? can someone tell me which ic is responsible to the o.s.d.
willyam1