Mulja tv repair portal
Equipment Repairs => LCD TV forum => Topic started by: thoma on March 01, 2013,09:17:47
-
Have a Toshiba 40LV655P
If you start this LCD-TV first a red green blue vertikal lines appear over the whole panel
who can help me?
regards thoma!need as well schematic
-
Hi,
these symptoms are usually a faulty screen, if you are lucky it may be a faulty T-con board, worth trying if you can get a cheap one.
Keith
-
I wonder the picture was 1 week ago very good
The mistake came suddenly so I think it can be the T-con board
but also can be the mainboard on which is the scaler chip
This is the transmitter over lvds cable and the t-con board is the receiver
but there are digital signals not to measure easily!
thats the problem of all LCD-TVs
thoma
-
Sounds very like a screen ribbon fault ( I think toshiba refer to it as the tape package or something similar ) there was an old thread about placing foam strips on the ribbons to make them contact might be worth a read
-
Can you tell me where is the thread and more about placing foam strips on the ribbons to make them contact !
thank you thoma!Is it possible that toshiba have a problem with some panels?
-
Basically it involved using mounting tape the foam stuff with one adhesive side to force contact. You cut small strips the length of the ribbon then placed them over the top of the ribbon where it meets the glass. When the screen frame is refitted it compresses the foam onto the ribbon Creating contact. If you can get ahold of Andy from ohm supplies I believe they actually stock a pad kit for this now.