Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: sinclairtv on March 12, 2013,07:53:13

Title: FSP271-5F01 power supply
Post by: sinclairtv on March 12, 2013,07:53:13

The set is stuck in standby so Im changing caps but I pulled out CS8 & CS35 thinking they were the same but 1 is 680 n the other is 1500 and I dont know what is what :oops:. Can anyone oblige with values please. At edge of board beside white connector. Thanks

Title: Re: FSP271-5F01 power supply
Post by: jordan on March 12, 2013,11:25:06

CS08-1500uF/16V
CS35-1500uF/16V

Title: Re: FSP271-5F01 power supply
Post by: sinclairtv on March 12, 2013,15:35:25

Thanks..also found they are connected in parallel so made no difference.

Title: Re: FSP271-5F01 power supply
Post by: E Parton on March 13, 2013,18:10:24

Stuck in standby doesn't automatically indicate a power supply fault..
If all supplies from the psu board are present and correct ..then more likely the fault is on the main board.
Micro not running ..or firmware corruption is a possibility
rgds

Title: Re: FSP271-5F01 power supply
Post by: sinclairtv on March 14, 2013,11:23:56

in this case it was caps in PSU causing fault