Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: t1412 on March 14, 2013,08:42:11

Title: 299lcddvd32
Post by: t1412 on March 14, 2013,08:42:11

afternoon guys. would anyone happen to have a service manual for this tv 299lcddvd32 thanks for your time

regards
shaun

Title: Re: 299lcddvd32
Post by: Keith on March 14, 2013,09:08:15

Hi Shaun

What make is it? And do you know what the chassis is?

Keith

Title: Re: 299lcddvd32
Post by: t1412 on March 14, 2013,13:24:01

i'll let you know tomorrow keith, it came in earlier didn't  have time to take the back off i' think it's similar to a technika i'll get all the info thanks for your interest

shaun

Title: Re: 299lcddvd32
Post by: t1412 on March 16, 2013,21:14:35

hi keith, here is the board it's a pw26-4, the fella said the standby light was flashing. had this set in a couple of weeks ago had it on test all weekend never went to standby while it was in my shed  so i rang him so he took the set back so he's brought it back with the same fault, back to square 1, just had it on test again still hasn't gone off. here is a picture of the power board, going to do voltage checks test caps, i did read on here that chip ic830 could cause this fault it's a fan7111 it's not the best picture thanks for your time

regards
shaun         

Title: Re: 299lcddvd32
Post by: jordan on March 17, 2013,02:03:55

Vestel 17PW26-4
Change this two capacitor 12nF/630V (C-878..)

Title: Re: 299lcddvd32
Post by: t1412 on March 17, 2013,05:12:57

 thanks jordon i'm going to change a few of those caps see how we a go, i found the service manual on here last night, says in the manual, c810 is a 10nf/630v and c878 is a 22nf/630v no big deal, thanks again. i don't  know what we'll do without ya 

shaun :051bye:     

Title: Re: 299lcddvd32
Post by: t1412 on March 22, 2013,08:50:43

hey jordon changed those caps seems to have worked, still takes a bit of time to fire up but does  comes on thanks

regards
shaun :sign0098: