Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: StevieG on March 17, 2013,09:16:30

Title: T370HWO2 V0 Control Board 06A22-1B
Post by: StevieG on March 17, 2013,09:16:30: T370HWO2 V0 Control Board 06A22-1B

Could someone tell me what chip as burnt off this board ive attached a photo. hope you can help i would be greatfull.

regards
steve
Title: Re: T370HWO2 V0 Control Board 06A22-1B
Post by: StevieG on March 17, 2013,09:59:35: Quote from: StevieG on March 17, 2013,09:16:30
T370HWO2 V0 Control Board 06A22-1B

Could someone tell me what chip as burnt off this board ive attached a photo. hope you can help i would be greatfull.

regards
steve

Where the part as blown it says F1 any idears ?
Title: Re: T370HWO2 V0 Control Board 06A22-1B
Post by: clark97 on March 18, 2013,02:42:31: SMD Fuse
Title: Re: T370HWO2 V0 Control Board 06A22-1B
Post by: t1412 on March 19, 2013,08:51:03: hi steve, i know the fuse has blown, they have a letter on them if i'm right it should say k which mean it's a 1.5 amp hope it helps

regards
shaun
Title: Re: T370HWO2 V0 Control Board 06A22-1B
Post by: StevieG on March 19, 2013,12:03:59: Quote from: t1412 on March 19, 2013,08:51:03
hi steve, i know the fuse has blown, they have a letter on them if i'm right it should say k which mean it's a 1.5 amp hope it helps

regards
shaun

Hi Shaun. it was complete burnt out i touched it and it fell to bits. where can i buy a fuse like that ?
Would these be any good ? http://www.goodsstall.co.uk/mc06cf-150---fuse-smd-0603-ff-15a---multicomp-22873-p.asp (http://www.goodsstall.co.uk/mc06cf-150---fuse-smd-0603-ff-15a---multicomp-22873-p.asp)

regards
steve
Title: Re: T370HWO2 V0 Control Board 06A22-1B
Post by: clark97 on March 20, 2013,17:19:19: 0603 is very small (size) measure the distance between the solder pads on the board then use this to decide what size you want. Try ebay just search smd fuse.
Use this link to decide which size to order...
http://www.westfloridacomponents.com/surface-mount-resistor-sizes.html