Mulja tv repair portal
Equipment Repairs => PLASMA TV forum => Topic started by: chrissie jones on April 07, 2013,12:40:26
-
Had this set in today with clicking on/off every few seconds with flashing blue standby light.....can u help please.
-
Check two elektrolitic capacitors 220uF/450V (parallel) on PSU board
-
also check for dry joints on q801/q802
regards
shaun
-
Checked employee and for dry joints
-
Check for s/c on q801 / 802 if either short theres a kit from ohm supplies. Includes the smd components for underside of board.