Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: thoma on May 07, 2013,06:14:24

Title: Samsung UE40C6000
Post by: thoma on May 07, 2013,06:14:24

Hallo to all!
I have a Samsung UE40C6000 for repair
only the LED is flashing nothing more
can anybody help me please
thoma

Title: Re: Samsung UE40C6000
Post by: thoma on May 09, 2013,16:48:55

hi guys!
Are there no samsung specialist in this forum who can help me?
i can`t believe
thoma
please some tips!

Title: Re: Samsung UE40C6000
Post by: jimca007 on May 15, 2013,19:24:49

flashing standby light and refusing to come out of standby very common when secondary output capacitors go pop ! on the PSU have a look around the top right corner for bulged or leaking capacitors theres loads of threads about new caps then eeprom reset etc

Title: Re: Samsung UE40C6000
Post by: michael first on May 18, 2013,11:37:28

 Hi,try this:unplug the connector from the psu to the main board and apply mains.if the psu is ok the  backlights (led) will lit then you have to check the main board.

Title: Re: Samsung UE40C6000
Post by: thoma on June 04, 2013,09:29:36

The mainboard was defect
regards thoma

Title: Re: Samsung UE40C6000
Post by: tvservice on July 11, 2013,14:32:56

When you said the main board was at fault did you mean the power board PD46AF1E I would like to know as I have the same fault. I can hear the relay tripping on the power board..... :c017: Thanks