Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: t1412 on May 21, 2013,05:49:48

Title: logik lcxw37hd1
Post by: t1412 on May 21, 2013,05:49:48
morning techs. has anyone got a service manual for this tv please it's a logik lcxw37hd1 just got a repair kit didn't notice r2 has blown can't see the markings on it, thanks for your time, ps here is the model number of the power supply FKV7827927 thanks


shaun   :57:
Title: Re: logik lcxw37hd1
Post by: t1412 on May 24, 2013,10:40:02
afternoon guys i've just fitted repair kit standby light flashing red quickly. can the little transfomer t4 give trouble do have 5 volt  standby no 12 volt, i think i've missed somethink any pointers would be great thanks for your time

regards
shaun   
Title: Re: logik lcxw37hd1
Post by: t1412 on May 30, 2013,09:39:33
still having problems with this tv, on the power supply board theres 2 model numbers amo1, 4501-0001-0400, 4500-0002-7800 the power supply had blown put psu repair kit 82 in, have power back on but the led and standby light flashing quickly does anyone have a manual for this,  r2 had blown not sure  if this is a thermistor or capacitor, did repair the transformer tr20 that's where i am at the minute .thanks for your time   

regards
shaun
Title: Re: logik lcxw37hd1
Post by: marky mark on June 01, 2013,18:20:05
I think I know the problem, is kit82 for a beko?    :party0036: :party0036: perhaps have a look at the board in the morning?
Title: Re: logik lcxw37hd1
Post by: t1412 on June 02, 2013,08:21:30
thanks mark
 
shaun
Title: Re: logik lcxw37hd1
Post by: t1412 on June 06, 2013,22:35:55
hi mark, did you manage to look at that board for the lcxw32hd1 thanks for your time

shaun 
Title: Re: logik lcxw37hd1
Post by: Icantthink on June 07, 2013,17:53:13
Hi

Ohms supplies sells the component separate, I would give them a bell and see what it is.

http://www.ohmsupplies.co.uk/RESISTOR-R2-LOGIK-LCXW32HDI-LCXW37HDI-LOG37LW427-FKV7827927

Sorry had to giggle t20...what a pain in the arse that is....did it blow the leg off
Title: Re: logik lcxw37hd1
Post by: marky mark on June 08, 2013,14:56:11
I don't think the board you have is a beko so you have the fittede the wrong kit?