Mulja tv repair portal
Equipment Repairs => LCD TV forum => Topic started by: Turnip on June 02, 2013,10:47:28
-
Hi folks,
Have one of these in with problems after an inverter trannie change.
It's listed as a monitor so I shoved it in that section, but enter here, as it came in for repair as a telly - Chris.
-
I had one recently but the fault was the inverter transformer. One of the secondary coils had gone high resistance. TV switched on for a couple of seconds then screen switched off. Primary was around 0.8ohms and the two secondaries were around 1100ohms on the replaced transformer.
Good Luck :)