Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: Turnip on June 22, 2013,11:36:28

Title: Lexor 32 inch cuts to S/by
Post by: Turnip on June 22, 2013,11:36:28

Hi folks,

Have one of these, a Lexor C6CLC32W18S0012063 (so it says on the label) Curious fault where intially  red led shows then blue where inverter functions and some OSG is present. After a second set cuts to S/by and then restarts.

Thought P/S secondary caps so changed them - no different.

Usually an inverter problem doesn't cause set to revert to S/By.

Any thoughts - Thanks - Chris.

Title: Re: Lexor 32 inch cuts to S/by
Post by: fix2003 on June 23, 2013,02:21:21

LC32W18S only seen one had to replace
 C521  47mfd in psu

Title: Re: Lexor 32 inch cuts to S/by
Post by: Turnip on June 23, 2013,13:13:07

Hi Vince, and thanks.

Will give C521 a go - Chris.

Later - Found board heat sensitive so Replaced all P/S caps - OK.