Mulja tv repair portal

Equipment Repairs => PLASMA TV forum => Topic started by: raybla on August 13, 2013,04:37:54

Title: LG 50PS3000 line down screen
Post by: raybla on August 13, 2013,04:37:54
Hi all I have LG 50ps3000 plasma TV that has a pencil line from top to bottom of the screen almost in the middle of the screen not noticeable on white background appears blue on flesh tones - any help here please
Title: Re: LG 50PS3000 line down screen
Post by: t1412 on August 13, 2013,11:01:22
hi, has this set got  buffer boards at the bottom  if so soldering the smd resistors can cure line faults. but i think it's a screen fault , hope i'm wrong

regards
shaun       
Title: Re: LG 50PS3000 line down screen
Post by: marky mark on August 14, 2013,17:53:12
Doesn't every plasma, ever made have buffer boards at the bottom?  Best stick to the day job I think  :72: perhaps someone should check the caps then say its probably just the switch?
Title: Re: LG 50PS3000 line down screen
Post by: t1412 on August 15, 2013,01:27:51
why are jocks so miserable, all i ever see  you do is put people down, if your that pissed off with your life why leave any comments?      
Title: Re: LG 50PS3000 line down screen
Post by: marky mark on August 15, 2013,17:47:49
Very sorry, please accept my apologies.

Rayblah, check if your set has 2 buffer boards running across the bottom of the set, if it doesn't, its worth a fortune  :s_laugh:
Title: Re: LG 50PS3000 line down screen
Post by: t1412 on August 15, 2013,22:04:35
england 3 scotland 2 i'll stick to my night job :03:
Title: Re: LG 50PS3000 line down screen
Post by: raybla on August 16, 2013,16:49:51
Hey guys many thanks for your comments - lets not get things out of hand here all I want to do is fix a tv thats what I thought this site was about - anyways yes three buffer boards across the bottom screen removed the middle one as thats the nearest to the fault and checked very close for bad solder joints none found - should i try and get another board? - other than that Im thinking it must be a display panel fault - what do you think out there I appreciate your thoughts fellow technicians - wow thats a lot from me regards Ray