Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: jaggsy1986 on August 16, 2013,05:04:45

Title: teco 32 fsp228-3f01 power supply problem
Post by: jaggsy1986 on August 16, 2013,05:04:45

hi i'm new to the forum, I recieved this tv and the standby light was flashing looked up on the internet and read that it was the capacitors, i've replaced the bulged ones but made abit of a cock up with the soldering, the tv now isn't even registering i'm getting no standby light coming on its as if the power isn't getting to the tv,  i've attatched some photos to show you what i've done. The power supply is  fsp228-3f01.

many thanks in advance

Title: Re: teco 32 fsp228-3f01 power supply problem
Post by: t1412 on August 18, 2013,04:05:09

to much heat from the soldering iron, burnt the pads

regards
shaun :73:

Title: Re: teco 32 fsp228-3f01 power supply problem
Post by: bluesmoke on August 19, 2013,06:33:30

There is a complete psu repair kit available for this psu as fitting the caps on there own doesn't always sort the problem .I will warn you its very small components if you struggled with caps you maybe better getting a second hand psu .